Our motto is simple: Make Empowering Engineering Designs. From concept to finished product, always grounded in manufacturability and real-world constraints.
All Rights Reserved
© 2026 OCMEE DESIGN LLC.
OCMEE Design LLC Customer Service Agreement (3D Printing) v2
Effective Date: March 28, 2024
Last Updated: December 22, 2025
IMPORTANT: THIS AGREEMENT INCLUDES (1) A WAIVER OF CLASS ACTIONS, (2) A WAIVER OF JURY TRIAL, AND (3) A REQUIREMENT THAT MOST DISPUTES BE RESOLVED BY BINDING ARBITRATION ON AN INDIVIDUAL BASIS.
0. Agreement overview
This Customer Service Agreement (the “Printing Agreement”) governs your (“you” or “Customer”) purchase of 3D printing services from OCMEE Design LLC (“OCMEE,” “we,” “us”) and, where applicable, your access to and use of OCMEE’s website (the “Site”) in connection with those Services.
This Printing Agreement is intended to be consistent with, and to supplement, OCMEE’s “Terms of Use, Services Terms, and Privacy Policy v2” (the “Master Terms”). If there is a conflict between the Master Terms and this Printing Agreement, this Printing Agreement controls only for 3D printing orders and related Services. All other use of the Site and other services remain governed by the Master Terms.
0.1 Related documents (incorporated by reference)
This Printing Agreement incorporates by reference:
OCMEE Design LLC Terms of Use, Services Terms, and Privacy Policy v2: [link]
OCMEE 3D Printing Manufacturing Standards: [link]
Any quote, invoice, order confirmation, or written specifications OCMEE expressly accepts in writing for your order (the “Order Documents”).
If there is a conflict among the documents listed above, Section 16 (Order of precedence) controls.
0.2 Changes
We may update this Printing Agreement by posting an updated version and changing the “Last Updated” date. Updates apply to orders placed after the updated version is posted, unless otherwise required by law.
1. Services
1.1 Scope. OCMEE provides FDM and/or SLA 3D printing and only the post-processing or secondary operations specifically listed in your Order Documents (collectively, the “Services”).
1.2 No professional engineering services by default. Unless explicitly listed and priced in the Order Documents, OCMEE does not provide PE-stamped engineering, regulatory certification, formal PPAP, CMM reports, material certificates, CT scans, or other inspection/certification packages.
1.3 Substitutions. Material, color, and process availability can change. If a specified material or resin is unavailable, we may propose a substitute. We will not proceed with a substitute that materially changes performance requirements without your written approval.
2. Customer responsibilities
You are responsible for:
Complying with all applicable laws (including intellectual property, export controls/sanctions, and product safety requirements).
Providing only designs, files, and other content that you own or have the legal right to use and to have manufactured.
Providing accurate and complete inputs (units, revision, geometry, tolerances, critical surfaces, orientation constraints, cosmetic requirements, and intended use conditions).
Reviewing and approving the Order Documents before we begin production.
Testing and validating all parts for fit, function, and suitability for your application, including any safety, regulatory, or performance requirements.
3. Accounts
OCMEE may allow you to submit requests through a contact form and file upload tools on the Site (each, a “Submission”). No user account is required. You are responsible for the accuracy and completeness of all Submissions (including units, revisions, tolerances, and intended use). You represent that you are authorized to provide the Submission and to request Services for yourself or your company.
We may reject, delete, or remove any Submission at any time for security, legal, or operational reasons.
4. Ordering process
4.1 Quotes. Quotes may be issued by email, PDF, invoice, or online. Unless stated otherwise, quotes are valid for 30 days.
4.2 Contract formation. A binding contract for an order exists only when OCMEE accepts your order. Acceptance occurs when OCMEE (a) sends an order confirmation, (b) begins production, or (c) accepts payment for the order.
4.3 Custom manufacturing; limited cancellation. Printed parts are custom-made. Once production starts, you may not cancel the order without OCMEE’s written approval. If we approve a cancellation, you must pay all costs incurred (materials, labor, setup, and any non-refundable shipping or processing fees).
4.4 Approved Specifications. We manufacture based on the “Approved Specifications,” meaning the exact file(s)/revision(s) referenced in the Order Documents and any requirements explicitly stated there (material, color, finish level, tolerances, quantity). You are responsible for ensuring Approved Specifications are complete and correct.
4.5 Changes. Any change after approval (files, revisions, material, finish, tolerances, quantity, delivery) may require a revised quote, additional cost, and schedule changes. We may pause work until changes are approved in writing.
4.6 Refusal/cancellation. We may refuse or cancel any quote or order if we reasonably believe it involves unlawful activity, IP infringement, prohibited items, safety risk, export-control risk, or technical impracticality. If we cancel before production starts, we will refund amounts paid for that order.
5. Manufacturing standards and limitations
5.1 Manufacturing Standards. Unless your Order Documents state otherwise, parts are produced to our 3D Printing Manufacturing Standards posted on our Site.
5.2 Process realities. Additive manufacturing has inherent variability (e.g., layer lines, support marks, minor surface artifacts, warpage/shrink risk, resin cure effects). These characteristics are not defects unless the Order Documents explicitly define a cosmetic requirement or tighter dimensional/cosmetic plan.
5.3 Impossibility or impracticality. Some geometries may be impossible or commercially impractical to print exactly as requested. If we identify a problem, we will attempt to contact you with options. If you approve a change in writing, we will proceed under revised specifications with any necessary price/lead-time adjustment.
6. Prohibited uses and safety-critical exclusion
Unless OCMEE explicitly agrees in a signed writing with a defined compliance, traceability, and inspection plan, the Services and printed parts are not intended or certified for:
Life-safety or medical use.
Aerospace/flight-critical use.
Restraint, braking, steering, crash-related, or other safety-critical automotive functions.
Regulated applications requiring certification, traceability, or compliance testing.
You are solely responsible for determining suitability and compliance for your end use.
7. Pricing, payment, and taxes
7.1 Payment terms. Payment terms are stated in the Order Documents. Unless we agree otherwise in writing, we may require payment in advance.
7.2 Late payments. Late balances may accrue interest at the lesser of 1.5% per month or the maximum permitted by law. You agree to reimburse reasonable collection costs (including attorneys’ fees where permitted) for amounts that remain unpaid.
7.3 Taxes. Prices exclude taxes unless stated. You are responsible for sales/use tax, duties, and similar charges. If you claim exemption, you must provide valid documentation.
7.4 Suspension for non-payment. We may suspend work, hold shipment, or decline new orders if invoices are overdue. We may also require cleared funds before shipment.
8. Shipping, delivery estimates, and risk of loss
8.1 Delivery estimates. Lead times are estimates only. Delays can occur due to print failures, rework, machine maintenance, supply issues, carrier delays, or changes you request.
8.2 Risk of loss. Unless stated otherwise in the Order Documents, risk of loss passes to you when the shipment is tendered to the carrier. You must report carrier damage claims promptly and retain packaging for inspection.
9. Inspection, acceptance, and claims
You must inspect parts within 5 business days of delivery. Any claim must be submitted in writing to office@ocmeed.com within that inspection window and include (a) the order number, (b) photos, and (c) measurement data or a clear defect description. If you do not submit a claim within the inspection window, the parts are deemed accepted, except for warranty claims made within the Warranty Period in Section 10.
10. Limited warranty
10.1 Coverage and period. OCMEE warrants that parts will substantially conform to the Approved Specifications under the Manufacturing Standards at the time of manufacture for 30 days from delivery (the “Warranty Period”).
10.2 Exclusions. This limited warranty does not cover issues caused by:
Customer files, incorrect units, wrong revision, or incomplete/incorrect specifications.
Normal additive cosmetic characteristics described in the Manufacturing Standards.
Misuse, improper storage, heat/UV/chemical exposure, abnormal environmental conditions, or normal wear.
Post-processing, machining, assembly, coating, or modification not performed by OCMEE (unless quoted and performed by OCMEE).
Installation errors or use outside intended conditions.
10.3 Exclusive remedy. If a valid warranty claim is confirmed, OCMEE will choose one remedy: (a) reprint/replace the affected part(s), or (b) refund/credit the amount you paid for the affected part(s). This is your exclusive remedy.
11. Disclaimer of warranties
Except for the limited warranty in Section 10, the Site, Services, and parts are provided “as is” and we disclaim all other warranties, express or implied, including merchantability, fitness for a particular purpose, and non-infringement, to the maximum extent permitted by law. We do not warrant that a part can be manufactured to every requested specification or that parts will meet your particular use requirements.
12. Limitation of liability
To the maximum extent permitted by law: (a) OCMEE is not liable for indirect, incidental, special, consequential, or punitive damages (including lost profits, lost revenue, business interruption, downtime, loss of data, or replacement costs), and (b) OCMEE’s total liability for any claim relating to an order will not exceed the amount you paid OCMEE for that specific order. If applicable law does not allow certain limitations, they apply to the maximum extent allowed.
13. Intellectual property and Customer Content
13.1 Your ownership. You retain ownership of your CAD files, specifications, and other content you provide (“Customer Content”).
13.2 Limited license to perform Services. You grant OCMEE a limited, non-exclusive license to use, store, reproduce (as needed for manufacturing), and process Customer Content only to (a) prepare quotes, (b) manufacture and deliver your order, (c) provide customer support, quality control, and recordkeeping, and (d) comply with legal obligations.
13.3 Your representations. You represent and warrant that you own or have the legal right to provide Customer Content and to request manufacture, and that doing so does not violate third-party rights or applicable law.
13.4 Confidentiality and security of Customer Content. Unless we sign a separate NDA, we will treat Customer Content as confidential and use reasonable administrative and technical safeguards to protect it. However, no system is perfectly secure. You are responsible for maintaining your own backups, and you agree that OCMEE is not liable for unauthorized access, loss, or corruption of Customer Content except to the extent caused by OCMEE’s willful misconduct.
13.5 Feedback. If you provide feedback or suggestions, you grant OCMEE a perpetual, irrevocable, worldwide, royalty-free right to use the feedback without obligation, provided we do not disclose your confidential information in doing so.
14. Indemnification by Customer
You will defend, indemnify, and hold harmless OCMEE and its owners, employees, contractors, and agents from third-party claims, damages, liabilities, and expenses (including reasonable attorneys’ fees) arising from or related to: (a) your designs/specifications and Customer Content, (b) alleged IP infringement based on Customer Content, (c) your end use, resale, or distribution of parts, (d) your breach of this Printing Agreement or the Master Terms, or (e) your violation of law, except to the extent caused by OCMEE’s gross negligence or willful misconduct.
15. Suspension and termination
We may suspend or terminate access to the Site or refuse service if you materially breach this Printing Agreement, fail to pay, or we reasonably suspect fraud or unlawful activity. Sections that by their nature should survive (payment, IP, disclaimers, limits of liability, indemnity, dispute resolution) will survive.
16. Order of precedence
If there is a conflict, the controlling order is:
A signed Master Services Agreement (“MSA”) or signed Statement of Work (“SOW”), if any (for the scope it covers).
This Printing Agreement (for 3D printing Services).
Order Documents we expressly accept in writing (e.g., quote/order confirmation/specifications).
OCMEE 3D Printing Manufacturing Standards.
The Master Terms.
Your purchase order terms and conditions (rejected unless OCMEE signs them).
We reject any additional or different terms in your purchase order or procurement system, even if we ship products or your system states “accepted,” unless OCMEE signs those terms in a separate writing.
17. Force majeure
Neither party is liable for delays or failures (except payment obligations) due to events beyond reasonable control, including natural disasters, power outages, carrier disruptions, labor shortages, supplier failures, and government actions.
18. Time limit to bring claims
Any claim relating to an order, the Services, or the Site must be brought within 1 year after the claim accrues, unless a longer period is required by law.
19. Dispute resolution, arbitration, class action waiver, and jury trial waiver
19.1 Informal resolution first. Before filing arbitration or court action, either party must send a written notice describing the dispute and the relief requested to office@ocmeed.com. The parties will attempt to resolve the dispute for 30 days.
19.2 Binding arbitration. If not resolved, disputes will be resolved by binding arbitration on an individual basis, administered by the American Arbitration Association (“AAA”) under its Commercial Arbitration Rules (or another agreed provider), unless small claims court is available.
19.3 Location and procedure. The arbitration will take place in Orange County, California, unless the parties agree to remote/video arbitration. The arbitrator may award any relief available in court under applicable law, subject to the limitations in this Printing Agreement.
19.4 No class actions. Disputes must be brought only in an individual capacity. No class, collective, or representative actions are permitted.
19.5 Waiver of jury trial. If a dispute is allowed to proceed in court for any reason, both parties waive the right to a jury trial.
19.6 Injunctive relief carve-out. Either party may seek injunctive relief in court for misuse of confidential information, misuse of intellectual property, or Site security issues.
19.7 Governing law for arbitration. The Federal Arbitration Act applies to this Section 19.
20. Governing law and venue
This Printing Agreement is governed by California law, without regard to conflict-of-law rules. If a dispute is allowed to proceed in court, venue will be state or federal courts located in Orange County, California.
21. Miscellaneous
Assignment. You may not assign this Printing Agreement without OCMEE’s written consent.
Severability. If any part is unenforceable, the rest remains in effect.
Entire agreement. This Printing Agreement plus the incorporated documents is the entire agreement for 3D printing Services unless an MSA/SOW is signed.
Electronic communications. Email and electronic records satisfy written notice requirements.